| Get bigger fuses |
| Solution |
|
| If you have smaller fuses (like 5 Amps), get bigger ones. But don't go too high. If you have 6 cells and you're blowing a 30-amp fuse (even 20 amps might be too much), then see the step on lowering the current draw. Also, if the electrical wires or electrodes get hot, it is an indication of too much current. |
|
| |
In my "6-pack" (6-cell system), each cell draws 2 amps for a total of 6 to 7 amps - this is a general guide to what your system may draw. However, every system is different, so this is not an exact specification. Use common sense. |
| |
|
|
|
|
